94.5-97 Ford Powerstroke Valair Ceramic/Kevlar Single Clutch

Description Ceramic/Kevlar Utilizing two different buttons on the clutch disc these clutches are aimed at the moderate performance trucks. Driving manners are very good for everyday driving and towing. Take-offs are very smooth and offer a little more slip and forgiveness than the feramic/feramic and ceramic/ceramic clutches. While the holding power for the iron faced clutch is the same as for the organic/feramic faced, the main advantage is less wear on the flywheel and longer life. Pedal pressure is typically a little higher than factory pedal pressure depending on plate pressure(3400#). Drive train and Hydraulic upgrades are not usually required. Some clutch rattle may be noticed while idling in neutral.  Ideally suited to trucks with moderate performance power modifications with 350-500HP. (highly recommended for towing)   This is not a Dual Disc Clutch. Picture is showing both sides of disc. 13″ x 1.25″ Performance ReplacementHD Spring Hub Ceramic / Kevlar Buttons (Both sides of disc shown) Rated @ 500HP / 1000 ft lbs Torque 3400# Pressure Plate Kit includes:3400# Pressure Plate, Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool. ***NOTE: Requires V2140 Flywheel*** This kits convert the Dual Mass 11″ Flywheel and Clutch to Solid 13″ Flywheel and Clutch.