Description Although listed as a fuel hose as that is technically what it is we have this product listed on this site as a brake servo hose. The original brake servo hose for T3 had a wire braid internally, this was superseeded by normal, common or garden 12mm fuel hose by VW. This hose matches the spec of the VW part number N0203901, if you search the parts catalogue you’ll find that is is used throughout the contempory VW range as both a fuel hose and a brake servo hose. The hose is lised as being E10 compliant however we would always suggest the hose with FPM liner as that is suitable for E100 and futureproof, see related products below for what we’d suggest you to use on a vehicle with modern fuel. With mid-permeation, NBR inner, Textile Reinforcement, CR outer (abrasion resistance outer rubber layer) DIN 73379-2A Commercial fuels, especially super grade fuels also for E10 fuel up to maximum of 50% benzol from – 30°C up to 50°C Air, Water and Heating Oil from – 30°C up to 90°C Diesel fuels ( gas-oil) with RME – addition from – 30°C up to 65°C According DIN 73379 the allowed permeability for hose type 2A can be up to 10g/100cm² while 24h at 60°C. As with all Cohline hose they are supplied to us in 20m coils. The maximum length available in one piece is 20m. We will always try to supply hoses in one complete length. Please note that only complete rolls can be returned, pieces cut from the roll cannot be returned for credit, Please ensure that you select the correct hose and length.
